Pete's Trailer Sales Inc

It's finally here! Now there is a trailer that can do almost anything! With a rugged 5" steel tube frame and a heavy duty 7,000# axle the possibilities are almost endless.  This highly maneuverable single axle trailer can hold a payload of 5,000#.  With the added luxury of a 13' tilt bed it is extremely easy to use.  Check out the specs and options below, and call us with any questions you may have.

Single Axle Tilt

Want a Side by Side Comparison?


Click Here:

http://www.pjtrailers.com/comparisons/tilt-trailers/


Sizes-

  • 81" Wide x 13' or 16' (13' Tilting & 3' Stationary) Long


Couplers-

  • 2 5/16" Adjustable Coupler (View)
  • 3" Pintle Eye


Axles-

  • 5,200# Drop Axle w/ Electric Brakes
  • 7,000# Drop Axle w/ Electric Brakes
  • 7,000# Drop Axle w/ Surge Brakes


Color-

​​*Anything other than Black is Additional Charge

  • Black Powdercoat (View)
  • Grey Powdercoat (View)
  • Red Powdercoat (View)
  • White Powdercoat (View)
  • ​Desert Tan
  • Tractor Orange Powdercoat 

*Primer Coat under the Powdercoat can be added to any color.


Other-

  • Rough Oak Deck (View)
  • BLACKWOOD Rubber Infused Lumber 
  • Upgrade to 10K Front Jack
  • 12" O.C. Crossmembers
  • Weld On  Strap Ratchets (View)
  • Power Up/Power Down
  • Power Up/Power Down & Gravity Down
  • Solar Battery Charger *only with Power Option
  • Aluminum Rims for 8 Bolt, 7,000# Axle (View)
  • Aluminum Rims for 6 Bolt, 5200# Axle (View)
  • 14 Ply Tire Upgrade (View)
  • Cold Weather Harness (View)
  • 11 gauge Steel Diamond Plate Floor
  • Expanded Metal Traction Plate on Tailboard
  • 1x1 Angle Traction Bars on Rear of Deck
  • Removable Stake Pocket D-Rings (View Picture 1, Picture 2)
  • Front Toolbox (View Picture 1, Picture 2)
  • 8,500# Super Winch (View)
  • Roller on Front of Deck for Winch Cable
  • Winch Plate (View)
  • Spare Tire
  • Spare Tire Mount

Specs

  • 21" Deck Height
  • 8,000# Drop Leg Jack
  • Easy-Lube Hubs
  • Spring Suspension
  • 235/80R16 10 Ply Radial Tires on 16" White Spoke Wheels (View)
  • Hydraulic Damping Cushion Cylinder (View)
  • 5" Channel Tongue (View)
  • 5"x2" Tube Frame
  • 16" O.C. 3"  Channel Cross Members
  • Expanded Metal Chain Tray (View)
  • Stake Pockets
  • 4 Recessed D-Rings (View) & 1 Center D-Ring (View)
  • 13' Tilt Deck
  • Bullnose Front Bumper (View)
  • ​Knife Point Rear Tail (View)
  • Electric Brakes w/ Electric Breakaway
  • Removable Steel Diamond Plate Fenders (View)
  • 11 Degree Tilt Angle (View)
  • 2" Treated Southern Yellow Pine Decking
  • Flush Mount LED Lights (View)
  • Sealed Wire Harness
  • Powdercoated

7K Single Axle Heavy Duty Tilt  (T1)

Other Configurations

Carhauler Bumper Pull Tilt

Options

Click Here to Watch a Video on the T1 Tilt:

715-234-1993